Best For
- You want better shots and more precision than an entry machine such as a Gaggia Classic.
- You make one or two milk drinks at a time.
- You are buying new with warranty support, or can diagnose a drip or a noise yourself.
Lelit Elizabeth Review: What Owners Like After Years of Use, and the Leaks and Quirks They Fix
Quick take
This Lelit Elizabeth review is built from owner reports on the espresso machine. Owners who talk about the machine as a whole mostly like it: better shots and more precision than an entry machine, a sturdy build, fair value, and two still happy after several years. The complaints are about upkeep and individual faults: leaks, drips and worn seals lead them, followed by brew pressure that overshoots its setting. Most come from troubleshooting threads, where owners post because something has gone wrong.
Compact dual-boiler espresso machine with electronic temperature control on both boilers.
This page covers the Lelit Elizabeth V3, the generation currently sold.
Buyer-facing pick with a clearer everyday fit
Strengths and Common Complaints
Owners praise its shots and precision, a sturdy build and fair value, and two are still happy after several years.
Leaks and worn seals lead the complaints, followed by pressure that overshoots its setting, early wear parts, lopsided extraction and a handful of handling quirks. • Total evidence snippets: 28 • Updated Oct 12, 2026
Strengths
- Owners who keep it and like it: Owners who talk about the machine as a whole mostly like it. One has had theirs a few years and still loves it as a capable, solidly built dual boiler; another is happy after four years and recommends it as one of the most versatile machines at about €1,200; an owner who dislikes its looks calls it sturdy, effective and dependable shot to shot and plans to keep it for many years; and a second-hand buyer calls it a great machine despite one problem.
- Better shots and more precision than an entry machine: After four years on a Gaggia Classic, a new owner found the Elizabeth more precise and capable from the first shot and set its OPV in about five minutes, and an open-box buyer loved it and made a lot of good shots before a leak appeared (see the complaints).
- Steam that suits one or two drinks: One owner was happy with how fast it steamed milk straight out of the box, enough that a stronger tip only came later as an upgrade (see the FAQ). An owner of both an Elizabeth and a larger Lelit finds its steaming quite slow even at maximum steam temperature, but fine for one or two cups steamed while the shot pulls.
- Fair value for a dual boiler: For one or two milk drinks at a time, the same two-Lelit owner sees no reason to pay for a pricier dual boiler and calls the Elizabeth great for its price, though they would not swap their other Lelit for it; the four-year owner recommends it at around €1,200.
Common Complaints
- Leaks, drips and worn seals: Leaks are the most-reported fault: a solenoid valve on a new machine dripping into the tray even when it is off, a faint hiss and a leak on an open-box unit after two weeks, a steam-boiler tube connection hissing and leaking steam, a leak from the bottom of the base after five years, a split steam vent tube among an older machine's repairs, and, after four years, a steam valve that no longer closes fully and a water tank replaced under warranty.
- Brew pressure that overshoots its setting: With the OPV set to 10 bar on a blind basket, one machine climbs to 12 bar with a puck before settling at 9 to 9.5; a V3 spikes high and then decays fast; and a month-old machine's gauge flickered between 8 and 9 bar alongside an odd noise. Only the last was resolved (see the FAQ).
- Wear parts and noises inside the first year: A steam-wand ball-joint O-ring broke at ten months, after which the wand ran hot, and another machine began squeaking during backflushing at about nine months, only with the blind basket in.
- Lopsided extraction: On one machine the puck saturates from one side every morning, with the handle side last every time, whatever the beans, grind or pre-infusion; no cause is confirmed. On a barely used second-hand unit, the group head sat tilted, so a split spout poured from one side only.
- Handling quirks: Smaller frustrations, each from a single owner: refilling the water tank is awkward; on a new machine the portafilter locks past 6 o'clock, where it gets in the way of steaming; the top cover's decorative seal is hard to seat; and the boxy body has edges sharp enough to cut.
Who Should Buy Lelit Elizabeth — and Who Should Avoid It
Fit depends on how many milk drinks you make at once and how much upkeep you will accept.
Not For
- You want a machine you never have to service.
- You make several milk drinks back to back.
- You are considering an open-box or used unit you cannot inspect.
Check live pricing and availability — this link helps keep the research running.
Check local offer Affiliate link — supports the site at no extra cost.Discussion Mention Counts
Sentiment across 81 product mentions. Mentions are not a count of unique owners or threads.
User Impression
−43%
Negative Sentiment Mix
81 mentions
8
53
20
Quick actions
Evidence From Public Buyer Discussions
These examples show the repeated buying signals behind Lelit Elizabeth. Use them to check strengths, complaints, and buyer fit before treating isolated comments as full reviews. • Updated Oct 12, 2026
Pro Positive Discussion Reports
Eight positive rows from seven threads, mostly owners describing the machine as a whole.
Like a great machine in its owners words Generation not stated 2026-10-02
Lelit Elizabeth PL92T group head tilted … The machine is great, but I now have one problem.
Like good value for one or two milk drinks at a time Generation not stated 2026-09-22
that's where elizabeth is great given it's price
Like still happy after four years and recommends it as one of the most versatile machines at about EUR 1 Generation not stated 2026-09-18
4 años estoy con la Elizabeth, cambié el depósito de agua en garantía, y la lanza de vapor no cierra bien del todo, pero por lo demás estoy contento. Como complemento cambié la ducha por ims Nanotech y las canastas VST de precisión 7+17 porque las de serie no me gustan. La lelit elizabeth que se encuentran por 1200 € es una buena recomendación, es de lo más versátil del mercado.
Like capable Generation not stated 2026-09-13
[r/espresso] Can get a Lelit Elizabeth for less than £1500. Really capable and solidly built dual boiler machine. Had mine a few years... love it.
Like loved it and made a lot of good shots before a hiss appeared Generation not stated 2026-09-04
lelit elizabeth leaks i bought an open box of lelit elizabeth and i love it, made a lot of good shots, after 2 week i notice a faint hizz and found this. i dont know if this is normal. am new to espresso machine so i would like to know if this is normal. lelit elizabeth lelit elizabeth
Like sturdy Generation not stated 2026-07-27
I think that Lelit Elizabeth has one of the ugliest looking designs for an espresso machine, like ever, in the history of all espresso machines, but still is an amazing unit! I still love it though, very sturdy, very functional, very effective, super consistent, love the way it works, and that's why I bought it. But man oh man, there wasn't a single day that I didn't think it's ugly, it's like the ugliest appliance in my entire kitchen. Every time I look at it, I can't be like - ohh what a gorgeous machine, l
Like far more precise and capable than a Gaggia Classic from the first shot Generation not stated 2026-07-23
From Gaagia Classic to Lelit Elizabeth I had Gaggia Classic for 4 years and since internet claims it's a very capable machine it must be true right ? right ? I got bored of it and didn't bring me any joy to use it so I bought Elizabeth. I couldn't decide between 2nd hand Bianca V2 or Elizabeth and went for Elizabeth due to space and my usecase. Immediately after first shot it feels much better much precise and much much capable than Gaggia. I should have switched sooner. Setting OVP is 5 minute job I lowered
Like steams milk fast even with the stock tip Generation not stated 2026-06-21
4 Hole Steam Wand Tip for Lelit Elizabeth When I first got my Elizabeth, I was really happy with how fast I could steam my milk. I never thought I would ever need something stronger, but after a while, when I got better, I thought about buying a 4-hole tip for the steam wand. I found one on Maxicoffee for 10€, which is pretty cheap for that kind of upgrade. I've only made a couple of coffees, but it's so strong the milk is done in under 7 seconds. I had to turn the temperature down from 140° to 135° for a bit mo
Con Critical Discussion Reports
Most critical reports are troubleshooting requests about a single fault, so they show what can fail rather than how often.
Complaint Group head sat tilted on a barely used second-hand unit, so a split spout poured from one side only Generation not stated 2026-10-02
Lelit Elizabeth PL92T group head tilted I got the Elizabeth used in very good condition on Amazon one month ago on Amazon with half price off. It was basically never used, maybe started once and that's it. The machine is great, but I now have one problem. I noticed that using the provided portafilter that splits in two I suddenly only get flow on the right side, the espresso doesn't come out on the left side. Weird, it didn't do that before. Then I looked and found the problem: suddenly the group head is tilted t
Complaint Squeaks during backflushing after about nine months Generation not stated 2026-09-26
Why is my Lelit Elizabeth making this squeaking noise when backflushing? It started doing this a few weeks ago, have had the machine for about 9 months. It's only when the blind basket is in for backflushing. It doesn't do it when no portafilter is in place. Lelit Elizabeth Lelit Elizabeth
Complaint Steaming is slow beyond one or two drinks Generation not stated 2026-09-22
I have Grace (its same as victoria, but 57mm) and elizabeth as well. Steaming milk on elizabeth is quite slow, even though I setup my steam temp on max. But for one or two cups it's fine and you can do it parallel while making an espresso, so unless you wanna make a couple drinks in a row I don't really see a benefit in pruchasing much more expensive dual boiler machine, that's where elizabeth is great given it's price. Tbh I wouldn't even swap victoria for Elizabeth, seems like a waste of money to me. Depends on h
Complaint Steam valve stopped sealing and the water tank needed a warranty replacement Generation not stated 2026-09-18
cambié el depósito de agua en garantía, y la lanza de vapor no cierra bien del todo
Complaint Solenoid valve drips into the tray almost constantly, even when off Generation not stated 2026-09-11
Lelit Elizabeth leaks constantly from solenoid valve? I've had my Elizabeth about 2-3 weeks and just noticed that water drips nearly constantly from the solenoid valve into the drip tray - it's a light stream when the machine is heating up but then continues at a slow drip even when off. Customer service for the place where I bought it says that this is normal. And that the Elizabeths drip a lot - only a problem if it's filling up the drip tray. Is this something others do see? Lelit Elizabeth Lelit Elizabeth
Complaint Faint hiss and a leak after two weeks on an open-box unit Generation not stated 2026-09-04
lelit elizabeth leaks … i bought an open box of lelit elizabeth … after 2 week i notice a faint hizz and found this.
Complaint Steam-wand ball-joint O-ring broke within ten months Generation not stated 2026-08-26
Lelit Elizabeth steam wand ball joint o-ring I do not know if it is obvious in the picture that the o-ring of the steam wand ball joint is broken I want to know which o-ring do I need to get as a replacement and where to find it within (Germany or the EU) I have also noticed that now the steam wand becomes hot , I checked for leaks within the machine and did not find any , is the o-ring the reason ? It is a little bit frustrating since i bought the machine only 10 months ago Lelit Elizabeth Lelit Elizabe
Complaint Puck saturates unevenly from one side Generation not stated 2026-08-25
[r/espresso] Uneven extraction troubleshoot help! [Lelit Elizabeth, DF64V2] Hi all, Every morning I watch the saturation of the puck start from one side and rarely reach the other side. The handle side of the basket is ALWAYS last to get saturated, if ever. I have tried everything. No matter what bean, grind size, pressure, pre infusion type/length, nothing changes. I
Complaint Brew pressure overshoots to 12 bar before settling, despite a 10-bar OPV setting Generation not stated 2026-08-16
Lelit Elizabeth odd OPV **I adjusted my OPV to 10 bar using a blind filter, but when brewing with a coffee puck, the pressure goes up to 12 bar and then drops to 9–9.5 bar. All of this happens within the first 15 seconds.** **Anyone else experiencing the same issue or know how to fix it?** Lelit Elizabeth OPV Lelit Elizabeth odd OPV **I adjusted my OPV to 10 bar using a blind filter, but when brewing with a coffee puck, the pressure goes up to 12 bar and then drops to 9-9.5 bar. All of this happens within the
Complaint Steam-boiler tube connection started leaking steam Generation not stated 2026-08-15
Steam boiler connect leaking steam [Lelit Elizabeth] Hi fellow espresso lovers, Sadly, the steam boiler of my Lelit Elizabeth has been hissing for a while. Today, I opened the top and discovered the small tube connection of the steam boiler is leaking steam. You can see in the picture the problematic connection is tarnished. What should I learn in order to repair it myself? Could I source the needed spare parts myself? Or is it at the point where I should take it to a repair shop? Appreciate all suggest
Complaint Broke down, and repairs turned up problem after problem Generation not stated 2026-08-15
Long over due update and new toy: Lelit Bianca v3 My Lelit Elizabeth broke a few months back and posted in this sub asking for some help. There were some suggestions but I didn't have the skills (or tools or time) to fix it so I brought it a local coffee store for them to take a look. They found problem after problem and the repair cost keeps on going up accordingly. They said they'd understand if I didn't want to proceed with the repair since it's now double the initial quote, but if I like they can recycle the m
Complaint Brew pressure spikes high, then drops off fast 2026-08-11
High pressure spike into fast decay [Lelit Elizabeth v3] My machine spikes super high in pressure and than decays really fast, is it enough to reduce pressure inside? Or might there be sth broken inside, I didn’t really find more information. Best regards :) High pressure spike into fast decay [Lelit Elizabeth v3]
Complaint Solenoid noise and a fluttering pressure gauge within the first month, fixed by a technician Generation not stated 2026-08-07
Weird noise from brand new Lelit Elizabeth Edit: The tech came home and opened up the machine. He took out the plunger I guess? from the solenoid area and manually operated the plunger a few times with a pin. He put it back and the sound came for the first pull. After that, the sound disappeared. I guess that solved the problem. Also, the designer who designed the top cover should be fired. What a terrible design. It took forever to seat the decorative seal properly. After multiple tries, it still not seated pro
Complaint Boxy design with edges sharp enough to cut Generation not stated 2026-07-27
It's a damn rectangle shaped steel box with more rectangles attached to its main body! And some of the edges on specific places are so sharp that they can easily cut me.
Complaint Portafilter swings past 6 o'clock and gets in the way of the steam wand Generation not stated 2026-07-27
Lelit Elizabeth I have used this machine around 10times, and every time I lock the basket in it seems to go further and further to the right. Even when I first used the machine it never went to 6 o’clock it always went past it. Do u think I have the wrong size gasket ? I have had this machine before and it was a push to get it to 6 o’clock. Any advice ? It’s annoying because to interfere with the steam process I have to remove the basket first. Lelit Elizabeth Lelit Elizabeth
Complaint Refilling the water tank is a pain Generation not stated 2026-07-23
I couldn't decide between 2nd hand Bianca V2 or Elizabeth and went for Elizabeth due to space and my usecase. … The water fill is pure PITA but I will print some funnel.
Complaint Button, water-sensor and steam vent-tube failures; repairs cost nearly the purchase price Generation not stated 2026-07-07
Brief comment to say: I dunno where you're going to find a Lelit Elizbeth for 1k unless you can find one used. I bought mine in 2020 for $1600 and they have not gone down in price. I also wasn't pleased with my Elizabeth. There's a fair bit of plastic and silicone tubing inside. I had issues with the buttons, the low water sensor (or something) broke, and the vent tube for the steam boiler split, so I had to replace that. Lots of leak problems. I ended up spending almost as much fixing it as I did purchasing
Complaint Started leaking from the base after five years Generation not stated 2026-07-06
Lelit Elizabeth leaking Hi all, My Elizabeth (5YO) started leaking a while back. It’s from the bottom of the base (see pictures). Any idea what could be wrong? I’d rather try to replace it myself if possible, to avoid shipping it. Lelit Elizabeth Lelit Elizabeth
Complaint Shot-to-shot taste is inconsistent 2026-06-29
[long rant] I'm so tired of this. I have an expensive grinder and nice machine, but the variation in the shots' taste each time is absolutely horrendous. I get a delicious espresso about 60% of the time, but the rest is worse than a cheap fully automatic machine! What more do I need to do, I have spent so much money, do I need to put on a lab coat and analyze with a computer every single shot I do, I just want to drink delicious shots 90% of the time. Eureka Mignon XL + Lelith Elizabeth v3 (yes not luxury or ul
Complaint Trips the GFCI when the pump runs, after eight years Generation not stated 2026-06-16
GFCI is tripped when water pump runs [Lelit Elizabeth] My Lelit Elizabeth lately has been tripping the GFCI when the water pump tries to run. At first I thought it's because I spilled some water into some electrical components when I refilled the tank. But I took out the back panel and everything looks clean and dry. There's also no wear and tear, no rusting, no dust, frayed wiring, or leakage that I can see anywhere. I've had this machine for about 8 years now and this is the first major problem I've encountered
View all retained evidence snippets (28)
Complaint Group head sat tilted on a barely used second-hand unit, so a split spout poured from one side only Generation not stated 2026-10-02
Lelit Elizabeth PL92T group head tilted I got the Elizabeth used in very good condition on Amazon one month ago on Amazon with half price off. It was basically never used, maybe started once and that's it. The machine is great, but I now have one problem. I noticed that using the provided portafilter that splits in two I suddenly only get flow on the right side, the espresso doesn't come out on the left side. Weird, it didn't do that before. Then I looked and found the problem: suddenly the group head is tilted t
Like a great machine in its owners words Generation not stated 2026-10-02
Lelit Elizabeth PL92T group head tilted … The machine is great, but I now have one problem.
Complaint Squeaks during backflushing after about nine months Generation not stated 2026-09-26
Why is my Lelit Elizabeth making this squeaking noise when backflushing? It started doing this a few weeks ago, have had the machine for about 9 months. It's only when the blind basket is in for backflushing. It doesn't do it when no portafilter is in place. Lelit Elizabeth Lelit Elizabeth
Complaint Steaming is slow beyond one or two drinks Generation not stated 2026-09-22
I have Grace (its same as victoria, but 57mm) and elizabeth as well. Steaming milk on elizabeth is quite slow, even though I setup my steam temp on max. But for one or two cups it's fine and you can do it parallel while making an espresso, so unless you wanna make a couple drinks in a row I don't really see a benefit in pruchasing much more expensive dual boiler machine, that's where elizabeth is great given it's price. Tbh I wouldn't even swap victoria for Elizabeth, seems like a waste of money to me. Depends on h
Like good value for one or two milk drinks at a time Generation not stated 2026-09-22
that's where elizabeth is great given it's price
Like still happy after four years and recommends it as one of the most versatile machines at about EUR 1 Generation not stated 2026-09-18
4 años estoy con la Elizabeth, cambié el depósito de agua en garantía, y la lanza de vapor no cierra bien del todo, pero por lo demás estoy contento. Como complemento cambié la ducha por ims Nanotech y las canastas VST de precisión 7+17 porque las de serie no me gustan. La lelit elizabeth que se encuentran por 1200 € es una buena recomendación, es de lo más versátil del mercado.
Complaint Steam valve stopped sealing and the water tank needed a warranty replacement Generation not stated 2026-09-18
cambié el depósito de agua en garantía, y la lanza de vapor no cierra bien del todo
Like capable Generation not stated 2026-09-13
[r/espresso] Can get a Lelit Elizabeth for less than £1500. Really capable and solidly built dual boiler machine. Had mine a few years... love it.
Complaint Solenoid valve drips into the tray almost constantly, even when off Generation not stated 2026-09-11
Lelit Elizabeth leaks constantly from solenoid valve? I've had my Elizabeth about 2-3 weeks and just noticed that water drips nearly constantly from the solenoid valve into the drip tray - it's a light stream when the machine is heating up but then continues at a slow drip even when off. Customer service for the place where I bought it says that this is normal. And that the Elizabeths drip a lot - only a problem if it's filling up the drip tray. Is this something others do see? Lelit Elizabeth Lelit Elizabeth
Like loved it and made a lot of good shots before a hiss appeared Generation not stated 2026-09-04
lelit elizabeth leaks i bought an open box of lelit elizabeth and i love it, made a lot of good shots, after 2 week i notice a faint hizz and found this. i dont know if this is normal. am new to espresso machine so i would like to know if this is normal. lelit elizabeth lelit elizabeth
Complaint Faint hiss and a leak after two weeks on an open-box unit Generation not stated 2026-09-04
lelit elizabeth leaks … i bought an open box of lelit elizabeth … after 2 week i notice a faint hizz and found this.
Complaint Steam-wand ball-joint O-ring broke within ten months Generation not stated 2026-08-26
Lelit Elizabeth steam wand ball joint o-ring I do not know if it is obvious in the picture that the o-ring of the steam wand ball joint is broken I want to know which o-ring do I need to get as a replacement and where to find it within (Germany or the EU) I have also noticed that now the steam wand becomes hot , I checked for leaks within the machine and did not find any , is the o-ring the reason ? It is a little bit frustrating since i bought the machine only 10 months ago Lelit Elizabeth Lelit Elizabe
Complaint Puck saturates unevenly from one side Generation not stated 2026-08-25
[r/espresso] Uneven extraction troubleshoot help! [Lelit Elizabeth, DF64V2] Hi all, Every morning I watch the saturation of the puck start from one side and rarely reach the other side. The handle side of the basket is ALWAYS last to get saturated, if ever. I have tried everything. No matter what bean, grind size, pressure, pre infusion type/length, nothing changes. I
Complaint Brew pressure overshoots to 12 bar before settling, despite a 10-bar OPV setting Generation not stated 2026-08-16
Lelit Elizabeth odd OPV **I adjusted my OPV to 10 bar using a blind filter, but when brewing with a coffee puck, the pressure goes up to 12 bar and then drops to 9–9.5 bar. All of this happens within the first 15 seconds.** **Anyone else experiencing the same issue or know how to fix it?** Lelit Elizabeth OPV Lelit Elizabeth odd OPV **I adjusted my OPV to 10 bar using a blind filter, but when brewing with a coffee puck, the pressure goes up to 12 bar and then drops to 9-9.5 bar. All of this happens within the
Complaint Steam-boiler tube connection started leaking steam Generation not stated 2026-08-15
Steam boiler connect leaking steam [Lelit Elizabeth] Hi fellow espresso lovers, Sadly, the steam boiler of my Lelit Elizabeth has been hissing for a while. Today, I opened the top and discovered the small tube connection of the steam boiler is leaking steam. You can see in the picture the problematic connection is tarnished. What should I learn in order to repair it myself? Could I source the needed spare parts myself? Or is it at the point where I should take it to a repair shop? Appreciate all suggest
Complaint Broke down, and repairs turned up problem after problem Generation not stated 2026-08-15
Long over due update and new toy: Lelit Bianca v3 My Lelit Elizabeth broke a few months back and posted in this sub asking for some help. There were some suggestions but I didn't have the skills (or tools or time) to fix it so I brought it a local coffee store for them to take a look. They found problem after problem and the repair cost keeps on going up accordingly. They said they'd understand if I didn't want to proceed with the repair since it's now double the initial quote, but if I like they can recycle the m
Complaint Brew pressure spikes high, then drops off fast 2026-08-11
High pressure spike into fast decay [Lelit Elizabeth v3] My machine spikes super high in pressure and than decays really fast, is it enough to reduce pressure inside? Or might there be sth broken inside, I didn’t really find more information. Best regards :) High pressure spike into fast decay [Lelit Elizabeth v3]
Complaint Solenoid noise and a fluttering pressure gauge within the first month, fixed by a technician Generation not stated 2026-08-07
Weird noise from brand new Lelit Elizabeth Edit: The tech came home and opened up the machine. He took out the plunger I guess? from the solenoid area and manually operated the plunger a few times with a pin. He put it back and the sound came for the first pull. After that, the sound disappeared. I guess that solved the problem. Also, the designer who designed the top cover should be fired. What a terrible design. It took forever to seat the decorative seal properly. After multiple tries, it still not seated pro
Like sturdy Generation not stated 2026-07-27
I think that Lelit Elizabeth has one of the ugliest looking designs for an espresso machine, like ever, in the history of all espresso machines, but still is an amazing unit! I still love it though, very sturdy, very functional, very effective, super consistent, love the way it works, and that's why I bought it. But man oh man, there wasn't a single day that I didn't think it's ugly, it's like the ugliest appliance in my entire kitchen. Every time I look at it, I can't be like - ohh what a gorgeous machine, l
Complaint Boxy design with edges sharp enough to cut Generation not stated 2026-07-27
It's a damn rectangle shaped steel box with more rectangles attached to its main body! And some of the edges on specific places are so sharp that they can easily cut me.
Complaint Portafilter swings past 6 o'clock and gets in the way of the steam wand Generation not stated 2026-07-27
Lelit Elizabeth I have used this machine around 10times, and every time I lock the basket in it seems to go further and further to the right. Even when I first used the machine it never went to 6 o’clock it always went past it. Do u think I have the wrong size gasket ? I have had this machine before and it was a push to get it to 6 o’clock. Any advice ? It’s annoying because to interfere with the steam process I have to remove the basket first. Lelit Elizabeth Lelit Elizabeth
Like far more precise and capable than a Gaggia Classic from the first shot Generation not stated 2026-07-23
From Gaagia Classic to Lelit Elizabeth I had Gaggia Classic for 4 years and since internet claims it's a very capable machine it must be true right ? right ? I got bored of it and didn't bring me any joy to use it so I bought Elizabeth. I couldn't decide between 2nd hand Bianca V2 or Elizabeth and went for Elizabeth due to space and my usecase. Immediately after first shot it feels much better much precise and much much capable than Gaggia. I should have switched sooner. Setting OVP is 5 minute job I lowered
Complaint Refilling the water tank is a pain Generation not stated 2026-07-23
I couldn't decide between 2nd hand Bianca V2 or Elizabeth and went for Elizabeth due to space and my usecase. … The water fill is pure PITA but I will print some funnel.
Complaint Button, water-sensor and steam vent-tube failures; repairs cost nearly the purchase price Generation not stated 2026-07-07
Brief comment to say: I dunno where you're going to find a Lelit Elizbeth for 1k unless you can find one used. I bought mine in 2020 for $1600 and they have not gone down in price. I also wasn't pleased with my Elizabeth. There's a fair bit of plastic and silicone tubing inside. I had issues with the buttons, the low water sensor (or something) broke, and the vent tube for the steam boiler split, so I had to replace that. Lots of leak problems. I ended up spending almost as much fixing it as I did purchasing
Complaint Started leaking from the base after five years Generation not stated 2026-07-06
Lelit Elizabeth leaking Hi all, My Elizabeth (5YO) started leaking a while back. It’s from the bottom of the base (see pictures). Any idea what could be wrong? I’d rather try to replace it myself if possible, to avoid shipping it. Lelit Elizabeth Lelit Elizabeth
Complaint Shot-to-shot taste is inconsistent 2026-06-29
[long rant] I'm so tired of this. I have an expensive grinder and nice machine, but the variation in the shots' taste each time is absolutely horrendous. I get a delicious espresso about 60% of the time, but the rest is worse than a cheap fully automatic machine! What more do I need to do, I have spent so much money, do I need to put on a lab coat and analyze with a computer every single shot I do, I just want to drink delicious shots 90% of the time. Eureka Mignon XL + Lelith Elizabeth v3 (yes not luxury or ul
Like steams milk fast even with the stock tip Generation not stated 2026-06-21
4 Hole Steam Wand Tip for Lelit Elizabeth When I first got my Elizabeth, I was really happy with how fast I could steam my milk. I never thought I would ever need something stronger, but after a while, when I got better, I thought about buying a 4-hole tip for the steam wand. I found one on Maxicoffee for 10€, which is pretty cheap for that kind of upgrade. I've only made a couple of coffees, but it's so strong the milk is done in under 7 seconds. I had to turn the temperature down from 140° to 135° for a bit mo
Complaint Trips the GFCI when the pump runs, after eight years Generation not stated 2026-06-16
GFCI is tripped when water pump runs [Lelit Elizabeth] My Lelit Elizabeth lately has been tripping the GFCI when the water pump tries to run. At first I thought it's because I spilled some water into some electrical components when I refilled the tank. But I took out the back panel and everything looks clean and dry. There's also no wear and tear, no rusting, no dust, frayed wiring, or leakage that I can see anywhere. I've had this machine for about 8 years now and this is the first major problem I've encountered
Compare Alternatives
Products frequently compared alongside Lelit Elizabeth:
Lelit Bianca
Lelit's E61 option; one buyer chose the Elizabeth over a used Bianca V2 for its smaller footprint
Gaggia Classic Pro
Cheaper single-boiler start point; an owner moving up found the Elizabeth more precise from the first shot
Buying Questions About Lelit Elizabeth
Quick answers to the main review, complaints, buyer-fit, and comparison questions shoppers ask before choosing Lelit Elizabeth.
Is it normal for a Lelit Elizabeth solenoid valve to drip?
Not clearly. The retailer of a machine two to three weeks old told its owner that Elizabeths drip a lot and that it only matters if the tray fills up, but the owner found a near-constant drip, even with the machine off, unusual enough to ask about. Treat that as the seller's view rather than a confirmed explanation, and raise a persistent drip under warranty.
Why does the Lelit Elizabeth's pressure gauge overshoot or flutter?
The threads do not settle it. For the month-old machine with the fluttering gauge and odd noise, a technician worked the solenoid's plunger by hand, and after one more shot the sound was gone, which its owner took as the fix. The two overshoot reports end without a diagnosis, so it is unknown whether they are faults or normal behaviour under a puck.
How long does a Lelit Elizabeth last?
Reports point both ways, and none names the version. Two owners are still happy after a few years and after four years, the second with a steam valve that no longer closes fully. On the other side, one machine ran about eight years before the GFCI started tripping whenever the pump runs, a five-year-old machine started leaking from the base, an owner who bought in 2020 spent almost as much on repairs as on the machine, and another broken machine turned up problem after problem in the shop until the repair quote doubled and its owner moved to a Bianca V3. Buy with warranty support and budget for seals and valves over the years.
Is a 4-hole steam tip worth adding to the Lelit Elizabeth?
For one owner it made an already quick wand much stronger: a 4-hole tip bought for about €10 steamed milk in under seven seconds after a couple of drinks, enough that they lowered the steam temperature from 140° to 135° for more working time. That is a modified setup, so expect the stock tip to be slower.
Should I buy a Lelit Elizabeth or a used Lelit Bianca?
One buyer weighed exactly this and chose the Elizabeth over a second-hand Bianca V2 because of space and how they use it. The evidence here does not compare the two machines' reliability or shots, so decide on counter space and the features you will actually use.
How We Analyze Buyer Feedback
These insights come from public owner discussions, grouped into recurring praise, complaints, and buying patterns to make the page easier to scan. Every quote links to the thread it came from.
Evidence snippets are selected from public discussions and grouped into themes. Counts represent how often a theme appears in the available evidence, not a survey or rating.